Callout |
Component Name |
---|---|
1 |
Low and Reverse Clutch Fluid Passage Seal |
2 |
1-2-3-4 Clutch Fluid Passage Seal |
3 |
Control Valve Body Spacer Plate Assembly |
4 |
Control Valve Body Assembly Note: Align the manual valve to the rod on the manual shaft. |
5 |
Control Valve Body Bolt M6 x 60 (Qty: 9) Caution: Refer to Fastener Caution.
11 Y (97 lb in) |
6 |
Control Valve Body Bolt M6 x 53 (Qty: 2) Tighten
11 Y (97 lb in) |
7 |
Manual Shaft Detent Lever Spring Assembly |
8 |
Manual Shaft Detent Spring Bolt M6 x 16 (Qty: 1) Tighten
12 Y (106 lb in) |
9 |
Fluid Level Control Valve Gasket |
10 |
Fluid Level Control Valve |
Steering Column Lower Trim Cover Replacement
Steering Column Lower Trim Cover Replacement
Callout
Component Name
Preliminary Procedure
Remove the instrument panel steering column upper trim cover. Refer to
Steering Column Upper Trim Cover Replacement.
...
Exhaust Manifold Heat Shield Installation
Install the exhaust manifold heat shield (2).
Caution: Refer to Fastener Caution.
Install the 3 exhaust manifold heat shield bolts (1) and the washers and
tighten to 8 Y (71 lb in).
...
Heated Oxygen Sensor Replacement - Sensor 2
Heated Oxygen Sensor Replacement - Sensor 2
Callout
Component Name
1
Heated Oxygen Sensor 2
Warning: In order to avoid being burned, do not service the
exhaust system while it is still hot. Service the ...