Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Crankshaft Position System Variation Learn

Note:

The crankshaft position sensor system variation learn procedure is required when the following service procedures have been performed, regardless of whether DTC P0315 is set:

  • Engine replacement
  • Engine control module (ECM) replacement
  • Crankshaft damper replacement
  • Crankshaft replacement
  • Crankshaft Position Sensor Replacement
  • Any engine repairs which disturb the crankshaft to crankshaft position sensor relationship

Note:

The ECM monitors certain component signals to determine if all the conditions are met to continue with the Crankshaft Position Variation Learn procedure.

  1. Ignition ON, observe the DTC information with a scan tool. Verify no other DTCs are set, except DTCs P0300–P0304, or P0315.
  • Select the Crankshaft Position Variation Learn Procedure with a scan tool and follow the on screen instructions:
  • Verify DTC P0315 does not set.
  • All OK.
  • Charge Air Cooler Replacement
    Charge Air Cooler Replacement Callout Component Name Preliminary Procedures Disconnect the negative battery cable. Refer to Battery ...

    Electronic Ignition System Description
    Electronic Ignition System Operation The electronic ignition system produces and controls the high energy secondary spark. This spark ignites the compressed air/fuel mixture at precisely t ...

    Other materials:

    DivX VOD
    Press DivX VOD. DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. See divx.com for more information and software tools on how to convert files into DivX videos. DIVX VID ...

    Bluetooth (Overview)
    For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: Placement and receipt of calls in a hands-free mode. Sharing of the cell phone’s address book or contact list with the vehicle. To minimize driver distraction, before driving, and w ...

    Air Cleaner Element Replacement
    Removal Procedure Disconnect mass air flow sensor wiring harness plug (2) from mass air flow sensor (3). Unclip mass air flow sensor wiring harness retainer clip from air cleaner housing (1). Remove the air cleaner outlet duct clamp̴ ...

    © 2014-2024 Copyright www.csmans.com
     
    0.0078