Chevrolet Sonic Repair Manual: Crankshaft Rear Oil Seal Replacement
Special Tools
EN-658 Rear Main Seal Installer
For equivalent regional tools, refer to Special Tools.
- Removal Procedure
-
- If equipped with automatic transmission, remove the flex plate. Refer to Automatic Transmission Flex Plate Replacement.
- If equipped with a manual transmission, remove the flywheel. Refer to Engine Flywheel Replacement.
- Using a flat-bladed tool, remove the rear crankshaft oil seal (1).
Note:
Do not damage the outside diameter of the crankshaft or chamber with any tool.
- Installation Procedure
-
- Install the crankshaft rear oil seal (1) with EN-658 installer (2).
- Using the EN-658 installer (2) , install a NEW crankshaft real oil seal (1).
- If equipped with a manual transmission, install the flywheel. Refer to Engine Flywheel Replacement.
- If equipped with automatic transmission, install the flex plate. Refer to Automatic Transmission Flex Plate Replacement.
Crankshaft Rear Oil Seal Installation
Special Tools
EN-658-1 Installer
EN-235-6 Installer
For equivalent regional tools, refer to Special Tools.
Slide the crankshaft rear oil seal (2) across the EN-235-6 installe ...
Exhaust2
...
Other materials:
Securing a Child Restraint Designed for the LATCH System
Warning
If a LATCH-type child restraint is not attached to anchors, the child restraint
will not be able to protect the child correctly. In a crash, the child could be
seriously injured or killed. Install a LATCH-type child restraint properly using
the anchors, or use the vehicle safety belts ...
Rear Side Door Lock Cylinder Opening Cover Replacement
Rear Side Door Lock Cylinder Opening Cover Replacement
Callout
Component Name
1
Rear Side Door Lock Cylinder Opening Cover
Procedure
Remove the rear side door lock cylinder, Do Not remove the outside
door han ...
Starting System Description and Operation
The starter motors are non-repairable starter motors. They have pole pieces that
are arranged around the armature. Both solenoid windings are energized. The pull-in
winding circuit is completed to the ground through the starter motor. The windings
work together magnetically to pull and hold in ...
0.0071