|
Callout |
Component Name |
|---|---|
|
1 |
Differential Carrier Assembly |
|
2 |
Final Drive Sun Gear |
Clutch and Differential Housing Disassemble
Differential Carrier Removal (6T40/45/50)Emblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Heating and Air Conditioning System Description and Operation
Engine Coolant
Engine coolant is the key element of the heating system. The engine thermostat
controls the normal engine operating coolant temperature. Coolant pumped out
of the engine enters the heater core through the inlet heater hose. The air
flowing through the HVAC module abs ...
Main Shaft Assemble (Gen 2)
Special Tools
3-0207944 Main Shaft Tapered Bearing Insert Tool
For equivalent regional tools, refer to Special Tools.
Install the 4th gear bearing assembly (1).
in!i.l.i-if
Note: The 3rd gear blocking ring lugs must be aligned with the
3rd/4th gear synchronizer ass ...