Safety Locks
Trunk (Sedan)Tire and Wheel Balancing (Collet Cone Selection)
Important: Never use the hub cap bore to center the wheel onto
the balancer. The pilot bore (on the hub side of the wheel) is machined
to be concentric to very tight non - standard tolerances. The bottom cap
bore is not machined to this same degree of precision.
Accurate mac ...
SIR Disabling and Enabling
SIR component location affects how a vehicle should be serviced. There are parts
of the SIR system installed in various locations around a vehicle. To find the location
of the SIR components refer to Supplemental Inflatable Restraint System Description
and Operation.
There are several reason ...
Crankcase Ventilation System Inspection/Diagnosis
Results of Incorrect Operation
A plugged positive crankcase ventilation (PCV) orifice or hose may cause
the following conditions:
Rough idle
Stalling or slow idle speed
Oil leaks
Oil in the throttle body
Sludge in the engine
Functional Check
With thes ...