Chevrolet Sonic Repair Manual: Draining Fluids and Oil Filter Removal
- Place a drip pan underneath.
- Remove the oil filter cap (1).
- Remove the oil filter cap seal (2).
- Remove and properly dispose of the oil filter insert (3).
- Re-install the oil filter cap.
- Remove the oil drain bolt.
- Drain the engine oil into the drip pan.
Oil Filter
...
Engine Oil and Oil Filter Replacement
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
Caution: To prevent damage to oil filter cap ensure proper
tool is used. Do not use an open end wrench wh ...
Other materials:
Brake Dust Warning
Warning: Avoid taking the following actions when you service wheel
brake parts:
Do not grind brake linings.
Do not sand brake linings.
Do not clean wheel brake parts with a dry brush or with compressed air.
Some models or aftermarket brake parts may contain asbestos fiber ...
Heater Core Inlet Tube Replacement
Heater Core Inlet Tube Replacement
Callout
Component Name
Preliminary Procedures
Remove the Heater and Air Conditioning Evaporator and Blower Module.
Refer to Heater and Air Conditioning Evaporator and Blower Module Removal
...
K20 Engine Control Module: Programming and Setup
Special Tools
EL-49642 SPS Programming Support Tool
For equivalent regional tools, refer to Special Tools.
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct ...
0.0046