Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T40/45/50)

Chevrolet Sonic Repair Manual / Powertrain / Transmission/Transaxle / Automatic / General / Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T40/45/50)



Drive and Driven Sprocket, Drive Link, and Park Pawl Installation

Callout

Component Name

1

Front Differential Carrier Baffle

2

Front Differential Carrier Baffle Bolt M6 x 16 (Qty: 2)

Caution:

Refer to Fastener Caution.

Tighten


12 Y (106 lb in)

3

Drive Link Lube Scoop Seal

4

Drive Link Lube Fluid Seal

5

Drive Link Lube Scoop

6

Driven Sprocket Bearing Assembly

7

Drive Sprocket Bearing Assembly

8

Driven Sprocket Assembly, Drive Sprocket Assembly and Drive Link

Note:

  • Install the drive link with the colored links and/or part number facing up.
  • The drive link, drive, and driven sprocket assemblies must be installed at the same time.
  • The ball bearing should spin freely and smoothly.
  • The driven sprocket ball bearing inner race has a slight interference fit with the case. Tap gently with the palm of a hand or a soft tip hammer to install.

9

Park Pawl

10

Park Pawl Spring

11

Park Pawl Shaft

Note:

Check to ensure that the park pawl operates freely and is not binding.

Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T30)
Drive and Driven Sprocket, Drive Link, and Park Pawl Installation Callout Component Name 1 Front Differential Carrier Ba ...

Drive and Driven Sprocket, Drive Link, and Park Pawl Removal (6T30)
Drive and Driven Sprocket, Drive Link, and Park Pawl Removal Callout Component Name 1 Drive Link Lube Scoop ...

Other materials:

System Settings
Configuring the Number of Favorite Pages To configure the number of available favorite pages: 1. Press the Push/MENU/TUNE button. 2. Select Radio Settings. 3. Select Radio Favorites. 4. Select the number of available favorite pages. 5. Press the / BACK button to go back to the System Configu ...

Rear Seat Back Cushion Hinge Replacement
Rear Seat Back Cushion Hinge Replacement Callout Component Name Preliminary Procedure Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation Remove the rear seat back cushion. Refer to Rear Seat ...

Inspection/Maintenance (I/M) System DTC Table (LUW)
Inspection/Maintenance (I/M) System DTC Table System DTCs Required to Set System Status to YES If an inspection/maintenance system status indicator did NOT update to YES during the Inspection/Maintenance System Check, review ea ...

В© 2014-2022 Copyright www.csmans.com
 
0.0065