Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Drive and Driven Sprocket, Drive Link, and Park Pawl Removal (6T30)

Chevrolet Sonic Repair Manual / Powertrain / Transmission/Transaxle / Automatic / General / Drive and Driven Sprocket, Drive Link, and Park Pawl Removal (6T30)



Drive and Driven Sprocket, Drive Link, and Park Pawl Removal

Callout

Component Name

1

Drive Link Lube Scoop

2

Drive Link Lube Scoop Seals

3

Drive Link Lube Fluid Seal

4

Driven Sprocket Assembly, Drive Sprocket and Park Gear Assembly and Drive Link

Note:

  1. The drive link, drive and driven sprocket assemblies must be removed at the same time.
  2. The driven sprocket ball bearing inner race has a slight interference fit with the case. Pull straight up to ease removal.

5

Driven Sprocket Bearing Assembly

Note:

The driven sprocket bearing may be stuck to the driven sprocket.

6

Baffle Retainer

7

Front Differential Carrier Baffle Bolts M6 x 16 (Qty: 2)

8

Front Differential Carrier Baffle

9

Park Pawl Shaft

10

Park Pawl Spring

11

Park Pawl

Drive and Driven Sprocket, Drive Link, and Park Pawl Installation (6T40/45/50)
Drive and Driven Sprocket, Drive Link, and Park Pawl Installation Callout Component Name 1 Front Differential Carrier Ba ...

Drive and Driven Sprocket, Drive Link, and Park Pawl Removal (6T40/45/50)
Drive and Driven Sprocket, Drive Link, and Park Pawl Removal Callout Component Name 1 Drive Link Lube Scoop ...

Other materials:

Protecting Exterior Bright Metal Moldings
Caution Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting. This damage would not be covered by the vehicle warranty. The bright metal moldings on the vehicle are aluminum. To prevent damage always follow these cleaning instructions: Be sure ...

Door Lock and Ignition Lock Folding and Non-Folding Key Cutting
High Security keys are available from the service parts system. Obtain the key code from the security card or from the GM Dealer World, Parts, Key Code Look Up system. If you have the key code and access to a Triax-E., BD Laser or other code key cutting machine from the GM Dealer Equipment C ...

Drive Range, Second Gear (Gen 2)
As vehicle speed increases and operating conditions become appropriate, the transmission control module (TCM) processes input signals from the automatic transmission input and output speed sensors, the throttle position sensor and other vehicle sensors to determine the precise moment to comman ...

В© 2014-2022 Copyright www.csmans.com
 
0.0071