Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Drive Belt Tensioner Installation

Chevrolet Sonic Repair Manual / Powertrain / Engine / Pulleys and Belts / Drive Belt Tensioner Installation


    Install the drive belt tensioner (1).
  1. Install the drive belt tensioner (1).
  2. Install the upper drive belt tensioner bolt (2).
  3. Install the lower drive belt tensioner bolt (3).
  4. Caution:

    Refer to Fastener Caution.

  5. Tighten the lower drive belt tensioner bolt (M8) to 22 Y (16 lb ft)

    .

  6. Tighten the upper drive belt tensioner bolt to  55 Y (41 lb ft)

    .

Pulleys and Belts
...

Drive Belt Tensioner Removal
Remove the drive belt tensioner bolt (1). Remove the drive belt tensioner (2). ...

Other materials:

Headlamp Bulb Replacement
Headlamp Bulb Replacement Callout Component Name Preliminary Procedure Open and support the hood assembly. 1 Accessory Bulb Cover?€‰(Qty:?€‰2) 2 Warning: Refe ...

Rear Disc Brake Pads Replacement
Removal Procedure Warning: Refer to Brake Dust Warning. Note: Always replace disc brake pads in axle sets. Inspect the fluid level in the brake master cylinder reservoir. If the brake fluid level is midway between the maximum-full point and the minimum allowab ...

Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Removal Procedure Note: Perform the following procedure when removing the retaining rings and cooler lines from the quick connect fittings located on the radiator and/or the transmission. Pull the plastic cap back from the quick connect fitting and dow ...

© 2014-2026 Copyright www.csmans.com
 
0.0059