Chevrolet Sonic manuals
 

Chevrolet Sonic Repair Manual: Drive Belt Tensioner Replacement

Chevrolet Sonic Repair Manual / Powertrain / Engine / Pulleys and Belts / Drive Belt Tensioner Replacement

Special Tools

For equivalent regional tools, refer to Special Tools.

Removal Procedure
  1. Remove the right front wheelhouse liner extension. Refer to Front Wheelhouse Liner Inner Front Extension Replacement
  2. Install the engine support fixture. Refer to Engine Support Fixture.
  3. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.


  4. Install the EN-48488 holding wrench (2) to the drive belt tensioner (1).


  5. Move the drive belt tensioner clockwise until the drive belt tensioner can be fixed with EN-955 locking pin (1).
  6. Remove the EN-48488 holding wrench .
  7. Remove the drive belt.
  8. Repeat steps 4 and 5 in order to remove the EN-955 locking pin from the drive belt tensioner.


  9. Remove the lower drive belt tensioner bolt (1).
  10. Remove the upper drive belt tensioner bolt (2).
  11. Remove the drive belt tensioner (3).
Installation Procedure

    Install the drive belt tensioner (3).
  1. Install the drive belt tensioner (3).
  2. Install the lower drive belt tensioner bolt (1).
  3. Install the upper drive belt tensioner bolt (2).

    4. Caution:

    Refer to Fastener Caution.

  4. Tighten the lower drive belt tensioner bolt (1) to 22 Y (16 lb ft)

    .

  5. Tighten the upper drive belt tensioner bolt (2) to 55 Y (41 lb ft)

    .



    6. Note:

    Engine mount bracket is removed.

  6. Install the EN-48488 holding wrench (2) to drive belt tensioner (1).


  7. Move the drive belt tensioner clockwise until the drive belt tensioner can be fixed with EN-955 locking pin (1).
  8. Install the drive belt.
  9. Move the drive belt tensioner clockwise until EN-955 locking pin can be removed.
  10. Allow the tensioner to slide back slowly.
  11. Remove the EN-48488 holding wrench .
  12. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.
  13. Install the right front wheelhouse liner extension. Refer to Front Wheelhouse Liner Inner Front Extension Replacement.
  14. Remove the engine support fixture. Refer to Engine Support Fixture.
Drive Belt Tensioner Removal
Remove the drive belt tensioner bolt (1). Remove the drive belt tensioner (2). ...

Drive Belt Installation
Special Tools EN-955 Locking Pins EN-48488 Holding Wrench For equivalent regional tools, refer to Special Tools. Note: Ensure that the drive belt tensioner is held with EN-955?E ...

Other materials:

What Will You See after an Airbag Inflates?
After the frontal airbags and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize an airbag inflated. Roof-rail airbags may still be at least partially inflated for some time after they inflate. Some components of the airbag module m ...

Battery Current Sensor Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Disconnect the battery current sensor from the body harness connector. Unclip the battery current sensor from the battery tray. Remove the battery ...

Front Compartment Fuse Block Replacement
Removal Procedure Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the junction block cover (1). Remove the positive battery cable nut (1) from the junction block. Remove the pos ...

В© 2014-2024 Copyright www.csmans.com
 
0.0056