Chevrolet Sonic Repair Manual: Drivetrain and Front Suspension Frame Skid Plate Replacement
- Removal Procedure
-
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the mounting bolts?€‰(1) for the front suspension frame skid plate.
- Remove the front suspension frame skid plate?€‰(2).
- Installation Procedure
-
- Position the front suspension frame skid plate?€‰(2) on the frame.
- Install the front suspension frame skid plate mounting bolts?€‰(2) and
tighten to 22?€‰Y (16?€‰lb?€‰ft)
.
Caution:
Refer to Fastener Caution.
Center Pillar Reinforcement Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Warning: Refer to Glass and Sheet Metal Handling Warning.
Note ...
Glass & Windows
...
Other materials:
Engine Cover Replacement
Engine Cover Replacement
Callout
Component Name
1
Engine Cover
Procedure
Use a suitable tool to first unclip the front of the cover, then rotate
the cover backward and pull upward to remove.
...
Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See Engine Compartment Overview for the location
of the reservoir.
There are only two reasons why the fluid level in the reservoir might go down:
The fluid level goes down b ...
Drivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...
0.0068