Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Engine Block

Positive Crankcase Ventilation Pipe Removal
Open the 2 positive crankcase ventilation pipe retainer clips (2) and (3). Note: Move retainer clamp (1) in direction of the arrow. Remove the positi ...

Engine Block Procedures
...

Other materials:

Lower Anchor and Top Tether Anchor Locations
(Top Tether Anchor): Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. To assist in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. To ass ...

Selecting the Alert Timing
The Collision Alert control is on the steering wheel. Press COLLISION ALERT to set the alert timing to far, medium, near or off. The first button press shows the current control setting on the DIC. Additional button presses will change this setting. The chosen setting will remain until it is ...

Multi-Axis Acceleration Sensor Module Programming and Setup
Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia Sensor Module (IMU) is not properly configured with the correct calibration software, the Electronic Brake Control Module will ...

В© 2014-2026 Copyright www.csmans.com
 
0.0045