Chevrolet Sonic manuals
 

Chevrolet Sonic Repair Manual: Engine Coolant Fan Replacement (LDE/LUW)

Chevrolet Sonic Repair Manual / Powertrain / Engine / Engine Cooling / Information / Engine Coolant Fan Replacement (LDE/LUW)

Removal Procedure
  1. Unclip transmission cooler lines from shroud if equipped.
  2. Unclip radiator surge tank outlet hose from fan shroud.
  3. Disconnect the engine coolant fan wiring harness.

    4. Note:

    You stand against driving direction.

  4. Unclip the engine coolant fan shroud (1) at the shown four mounting points.
  5. Remove the engine coolant fan shroud (1).

  6. Remove the engine coolant fan resistor (1) by unclipping the retainer clip (2).
  7. Unclip the engine coolant fan to engine coolant fan resistor wiring harness (arrows).
  8. Remove the 3 engine coolant fan engine bolts (3) from the engine coolant fan.
  9. Remove the engine coolant fan.
Installation Procedure

    Install the engine coolant fan.
  1. Install the engine coolant fan.

    2. Caution:

    Refer to Fastener Caution

  2. Install the 3 engine coolant fan engine bolts (3) to the engine coolant fan and tighten to 4 Y (35 lb in)

    .

  3. Clip in the engine coolant fan to the engine coolant fan resistor wiring harness (arrows).
  4. Install the engine coolant fan resistor (1) by clipping the retainer clip (2).

  5. Install the engine coolant fan shroud (1).
  6. Clip in the engine coolant fan shroud (1) at the shown four mounting points.
  7. Connect the engine coolant fan wiring harness.
  8. Clip the radiator surge tank outlet hose to the fan shroud.
  9. Clip the transmission cooler lines to the fan shroud if equipped.
Engine Coolant Air Bleed Hose Replacement (LUV)
Engine Coolant Air Bleed Hose Replacement Callout Component Name 1 Engine Coolant Air Bleed Hose Clamp (Qty: 2) ...

Engine Coolant Fan Replacement (LUV)
Engine Coolant Fan Replacement Callout Component Name Preliminary Procedure Remove the engine coolant fan shroud. Refer to Engi ...

Other materials:

Communication Interface Module Battery Replacement
Communication Interface Module Battery Replacement Callout Component Name Preliminary Procedure Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement 1 ...

Evaporator Air Temperature Sensor Replacement (LHD)
Evaporator Air Temperature Sensor Replacement Callout Component Name 1 Evaporator Air Refrigerant Temperature Sensor Procedures Disconnect the refrigerant temperature sensor electrical connector. Twist an ...

Camshaft Position Actuator Solenoid Valve Installation
Caution: The camshaft position actuator solenoid valves must be kept parallel to the engine front cover during removal and installation. The camshaft position actuator solenoid valves can be damaged if they become wedged or stuck during this process. Install the 2̴ ...

В© 2014-2025 Copyright www.csmans.com
 
0.0061