Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the engine coolant fan shroud. Refer to Engine Coolant Fan Shroud Replacement. |
|
1 |
Engine Coolant Fan Motor Electrical Harness Connector Fastener Caution: Refer to Fastener Caution. |
2 |
Engine Coolant Fan Motor Fastener (Qty: 3) |
3 |
Engine Coolant Fan Motor Assembly |
Trunk (Sedan)
Warning
Exhaust gases can enter the vehicle if it is driven with the liftgate, hatch/trunk
open, or with any objects that pass through the seal between the body and the hatch/trunk
or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or
smelled. It can cause unconsci ...
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning.
Note: There are several types of plastic collar fuel and evaporative
emission quick connect fittings used on this vehicle.
Bartholomew (1)
Q Release (2)
Squeeze to Rele ...
Air Conditioning Compressor Bracket Installation
Install the air conditioning compressor bracket (2).
Caution: Refer to Fastener Caution.
Install the 3 air conditioning compressor bracket bolts (1) and tighten
to 22 Y (16 lb ft).
...