|
Callout |
Component Name |
|---|---|
Preliminary Procedure
|
|
|
1 |
Engine Coolant Fan Resistor Mount Procedure
Disconnect the electrical connections. |
Engine Coolant Fan Replacement (LUV)
Engine Coolant Temperature Sensor Replacement (Water Outlet)Turbocharger Disassemble
Special Tool
EN-49940 Remover Quick Connector
For equivalent regional tools, refer to Special Tools.
Remove the 2 turbocharger oil return pipe bolts (2).
Remove the turbocharger oil return pipe (1) and the sealing (3) from the
turbocharger.
Note ...
Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection
Low and Reverse and 1-2-3-4 Clutch Housing Cleaning and Inspection
Callout
Component Name
Caution: After cleaning the transmission components, allow
to air dry. Do not use cloth or paper towels in order to dry any transmi ...
Starting the engine
Basic information
1. Apply the parking brake.
2. Confirm that the Nissan Armada is in the P (Park) position.
The Intelligent Key must be inside the Nissan Armada when operating the ignition
system.
3. Press the ignition switch to the ON position. Then depress the brake pedal
and press the ig ...