Chevrolet Sonic Repair Manual: Engine Oil Cooler Coolant Inlet Hose Replacement (LUV)

Chevrolet Sonic Repair Manual / Powertrain / Engine / Engine Cooling / Information / Engine Oil Cooler Coolant Inlet Hose Replacement (LUV)

Engine Oil Cooler Coolant Inlet Hose Replacement
Callout	Component Name
Preliminary Procedure Open the hood. Drain the cooling system. Refer to Cooling System Draining and Filling.
1	Oil Cooler Inlet Hose Clamp Procedure Place a drain pan below the vehicle. Remove / install engine coolant air bleed hose clamp.
2	Oil Cooler Inlet Hose Clamp Procedure Place a drain pan below the vehicle. Remove / install engine coolant air bleed hose clamp.
3	Oil Cooler Inlet Hose

Engine Coolant Temperature Sensor Replacement (Water Outlet)

Engine Coolant Temperature Sensor Replacement Callout Component Name Preliminary Procedure Disconnect the negative battery cable. R ...

Engine Oil Cooler Inlet Pipe Replacement (LUW)

Removal Procedure Drain the cooling system. Refer to Cooling System Draining and Filling. Remove the exhaust manifold with catalytic converter. Refer to Exhaust Manifold with C ...

Other materials:

Special Tools (MIT Tool Instructions)
Bluetooth Pairing for Vehicles with Radio RPO: UF7 Either reset the pin code on the radio to 0000, or go under Device Info on the radio and see what the pin code is (to enter it later on the MIT). Turn the BT discoverable ON in the radio Bluetooth settings. Press Pair De ...

Hood Side Seal Replacement
Hood Side Seal Replacement Callout Component Name 1 Hood Side Seal Push-In Retainer (Qty:?€‰6) 2 Hood Side Seal ...

2-6 Clutch Piston Installation (6T40/45/50)
2-6 Clutch Piston Installation Callout Component Name 1 2?E Clutch Piston Assembly Note: Position the 2?E piston air bleed and large slot toward the top of the case. DT-47796 seal protector ...

0.0114