|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the engine oil cooler pipe. Refer to Engine Oil Cooler Pipe Replacement. |
|
|
1 |
Engine Oil Cooler Outlet Pipe Bolt (Qty: 2) Caution: Refer to Fastener Caution.
8 Y (71 lb in) |
|
2 |
Seals Note: Replace with NEW seals. |
|
3 |
Engine Oil Cooler Outlet Pipe |
Engine Oil Cooler Outlet Hose Replacement (LUV)
Engine Oil Cooler Pipe Replacement (LUW)If a Tire Goes Flat
It is unusual for a tire to blow out while driving, especially if the tires are
maintained properly. See Tires. If air goes out of a tire, it is much
more likely to leak out slowly. But if there is ever a blowout, here are a few tips
about what to expect and what to do:
If a front tire fails, ...
Instrument Panel Tie Bar Replacement
Removal Procedure
Remove the Instrument panel assembly. Refer to Instrument Panel Assembly
Replacement.
Remove the steering column and wheel from the vehicle. Refer to Steering
Column Replacement.
Remove the air inlet grill panel. Refer to Air Inlet Grille Panel Replacem ...
Fuel Tank Fuel Pump Module Replacement (Steel Tank)
Special Tools
EN-48279 Fuel Sender Lock Ring Wrench
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
Remove the fuel tank. Refer to Fuel Tank Replacement.
Disconnect the ...