|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the engine oil cooler pipe. Refer to Engine Oil Cooler Pipe Replacement. |
|
|
1 |
Engine Oil Cooler Outlet Pipe Bolt (Qty: 2) Caution: Refer to Fastener Caution.
8 Y (71 lb in) |
|
2 |
Seals Note: Replace with NEW seals. |
|
3 |
Engine Oil Cooler Outlet Pipe |
Engine Oil Cooler Outlet Hose Replacement (LUV)
Engine Oil Cooler Pipe Replacement (LUW)Automatic Transmission Fluid
How to Check Automatic Transmission Fluid
It is not necessary to check the transmission fluid level. A transmission fluid
leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your
dealer and have it repaired as soon as possible.
There is a special procedure for checkin ...
Drivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...
Evaporative Emission Control System Description
Typical Evaporative Emission (EVAP) System Hose Routing Diagram
(1)
Evaporative Emissions (EVAP) Purge Solenoid Valve
(2)
EVAP Canister
(3)
EVAP Vapor Tube
(4)
Vapor Recirculation Tube
(5) ...