Chevrolet Sonic Owner's Manual: Engine Oil Pressure Light
Caution
Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer.
If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on
briefly when the engine is started. It provides information about tire pressures
and the TPMS.
When the Light Is O ...
Low Fuel Warning Light
This light comes on for a few seconds when the ignition is turned on as a check
to indicate it is working. If it does not come on, have it fixed.
This light comes on when the vehicle is low on fu ...
Other materials:
Brakes
If the overheat warning no longer displays, the vehicle can be driven. Continue
to drive the vehicle slowly for about 10 minutes. Keep a safe vehicle distance from
the vehicle in front. If the warning does not come back on, continue to drive normally
and have the cooling system checked for pro ...
Park Brake and P (Park) Mechanism Check
Warning
When you are doing this check, the vehicle could begin to move. You or others
could be injured and property could be damaged. Make sure there is room in front
of the vehicle in case it begins to roll. Be ready to apply the regular brake at
once should the vehicle begin to move.
Park ...
SIR Service Precautions
General Service Instructions
Warning: When performing service on or near the SIR components
or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling
and Enabling . Failure to observe the correct procedure could cause deployment
of the SIR components, person ...
0.0107