Callout |
Component Name |
---|---|
1 |
Purge Pipe Fittings (Qty: 2) Procedure
Disconnect the vacuum lines quick connect fitting from the evaporative emission canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service. |
2 |
Evaporative Emission Canister Purge Solenoid Valve Procedure
|
Antilock Brake System (ABS) Warning Light
This light comes on briefly when the engine is started.
If the light stays on, turn the ignition to LOCK/OFF or if the light comes on,
stop as soon as possible and turn the ignition off. Then start the engine again
to reset the system. If the light still stays on, or comes on again while driv ...
Clutch and Differential Housing Disassemble
Special Tools
M-680770 Universal Sliding Mallet
R-0007758 Holding Fixture
R-0407008 Counter Shaft Bearing Remover
R-0407010 Input Shaft Needle Bearing Puller and Driver
R-0407013 Gearshift Device Bushing Puller
R-0007761 Universal Handle for Pullers and Installers
T-0207928 Retai ...
Engine Oil Cooler Disassemble
Remove the oil cooler coolant inlet hose clamp (2).
Remove the oil cooler coolant inlet hose (1).
Remove the oil cooler coolant inlet pipe bolt (7)
Remove the oil cooler coolant inlet pipe (3) and the seal ring (6).
Remove the oil cooler coolant out ...