|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Evaporative Emissions Canister Vent Solenoid Valve Procedure
Turn the evaporative emission canister vent solenoid valve counter clockwise 45 degrees and remove the solenoid from the evaporative emissions canister. |
Evaporative Emission Canister Purge Solenoid Valve Replacement
PCVFull-Cut Method Description
Note:
If corrosion of the pinch-weld flange is present, or if sheet metal
repairs or replacements are required, refinish the pinch-weld flange in
order to present a clean, primer-only surface.
If paint repairs are required, mask the flange bonding area, prior to
applying th ...
Intake Camshaft Installation
Note: Mind the markings on the camshaft bearing caps. Camshaft
bearing caps should be installed in their original position.
Lubricate camshaft and camshaft bearing caps with engine oil.
Install the intake camshaft (3).
Install the 5 camshaft bearing caps ...
Front Wheel Drive Shaft Seal Replacement - Right Side
Front Wheel Drive Shaft Seal Replacement - Right Side
Callout
Component Name
Preliminary Procedures
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front wheel drive shaft from the trans ...