Chevrolet Sonic Repair Manual: Exhaust Manifold Heat Shield Installation
- Install the exhaust manifold heat shield (2).
- Install the 3 exhaust manifold heat shield bolts (1) and the washers and
tighten to 8 Y (71 lb in)
.
Caution:
Refer to Fastener Caution.
Exhaust Manifold Cleaning and Inspection
Clean the exhaust manifold (1) in solvent.
Warning: Wear safety glasses in order to avoid eye damage.
Dry the exhaust manifold (1) with compressed air.
An exhaus ...
Exhaust Manifold Heat Shield Removal
Remove the 3 exhaust manifold heat shield bolts (1) and the washers.
Remove the exhaust manifold heat shield (2).
...
Other materials:
Fuel Tank Fuel Pump Module Replacement
Special Tools
EN-48279 Fuel Sender Lock Ring Tool
For equivalent regional tools, refer Special Tools.
Removal Procedure
Relieve the fuel system pressure. Refer to Fuel Pressure Relief
Remove the fuel tank. Refer to Fuel Tank Replacement.
Disconnect the electrical c ...
Exhaust Camshaft Removal
Remove the camshaft bearing cap bolts in a spiral sequence as shown one
turn at a time until there is no spring tension pushing on the camshaft.
Note: Mind the markings on the camshaft bearing caps to ensure
they will be installed in the same position.
Remove the ...
SAND mode
WARNING
When SAND mode is activated in the Nissan Armada, the Vehicle Dynamic Control
(VDC) system operates with reduced intervention. As a result, the system may not
react in the same way as it does in STANDARD mode. To minimize the risk of accidents,
always drive the Nissan Armada with caut ...
0.0082