|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Disconnect the exhaust system hangers in the rear and allow the exhaust system to rest on the rear axle. |
|
|
1 |
Exhaust Heat Shield Rear Muffler Fastener (Qty: 3) |
|
2 |
Exhaust Heat Shield Rear Muffler |
Exhaust Manifold Heat Shield Replacement (LUW)
Fuel Tank Heat Shield ReplacementRemote Vehicle Start
If equipped, this feature allows the engine to be started from outside the vehicle.
(Remote Vehicle Start): This button
will be on the RKE transmitter if the vehicle has remote start.
The climate control system will use the previous settings during a remote start.
The rear defog may come on d ...
Drum Brake Adjusting Hardware Inspection
Warning: Refer to Brake Dust Warning.
Visually inspect the adjuster actuator spring (1) for the following conditions:
Excessive stretching
Excessive bending
Excessive corrosion
Broken
Missing
If any of the conditions listed were found, the adjuster actu ...
Engine Oil Cooler Housing Removal
Remove the 2 engine oil cooler pipe bolts (1).
Remove the oil cooler pipe (2).
h.\.\,.\\..,v:..//
Remove the 5 engine oil cooler housing bolts (2).
Remove the engine oil cooler housing (1).
Remove the engine oil cooler inlet pi ...