Callout |
Component Name |
---|---|
Preliminary Procedure
Disconnect the exhaust system hangers in the rear and allow the exhaust system to rest on the rear axle. |
|
1 |
Exhaust Heat Shield Rear Muffler Fastener (Qty: 3) |
2 |
Exhaust Heat Shield Rear Muffler |
Backup Lamp Bulb Replacement (Sedan)
Backup Lamp Bulb Replacement
Callout
Component Name
Preliminary Procedure
Remove the tail lamp assembly. Refer to Tail Lamp Replacement.
1
Back Up Lamp Bulb Socket
Procedure
Rotate the back u ...
Rear Bumper Impact Bar Replacement (Sedan)
Rear Bumper Impact Bar Replacement
Callout
Component Name
Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.
1
Rear Bumper Impact Bar Bolt (Qty:?€‰4 ...
Scrub Radius Description
Ideally, the scrub radius is as small as possible. Normally, the SAI angle and
the centerline of the tire and the wheel intersect below the road surface, causing
a positive scrub radius. With struts, the SAI angle is much larger than the long
arm/short arm type of suspension. This allows the S ...