|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the floor panel carpet . Refer to Floor Panel Carpet Replacement. |
|
|
1 |
Floor Rear Air Outlet Duct Push-In Fastener |
|
2 |
Floor Rear Air Outlet Duct |
Floor Air Outlet Duct Replacement - Right Side (LHD)
Floor Rear Air Outlet Duct Replacement - Right SidePretensioner Handling and Scrapping
Scrapping Procedure
During the course of a vehicles useful life, certain situations may arise
which will necessitate the disposal of a live (undeployed) pretensioner. The
following information covers the proper procedures for the disposing of a live
(undeployed) pretensioner. Deplo ...
Rear Wheel Bearing and Hub Replacement (Disc Brake)
Special Tools
EN–45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Raise and suitably support the vehicle. Refer to Lifting and Jacking
the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal
and Insta ...
Scrub Radius Description
Ideally, the scrub radius is as small as possible. Normally, the SAI angle and
the centerline of the tire and the wheel intersect below the road surface, causing
a positive scrub radius. With struts, the SAI angle is much larger than the long
arm/short arm type of suspension. This allows the S ...