| Figure 1: | Case - Control Valve Body Side (Left) |
| Figure 2: | Case - Pump Side (Back) |
| Figure 3: | Control Valve Body - Case Side (Left) |
| Figure 4: | Control Valve Body - Channel Plate Side (Right - No Valves) |
| Figure 5: | Pump Body - Pump Cover Side (Front) |
| Figure 6: | Pump Cover - Pump Body Side (Back) |
| Figure 7: | Spacer Plate (12) - Case Side (Left) |
| Figure 8: | Spacer Plate (402) - Channel Plate Side (Right) |
| Figure 9: | Torque Converter Clutch Housing - Pump Side (Front) |
| Figure 10: | Control Solenoid Valve Assembly with Filter Plate - Channel Plate Side (Front) |
| Figure 11: | Channel Plate - Control Solenoid Valve Assembly Side (Right) |
| Figure 12: | Channel Plate - Control Valve Body Side (Left) |
Engine Replacement (Automatic Transmission)
Fluid Passages (Gen 2)Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire
(Not Punctured)
The kit includes:
1. Sealant Canister Inlet Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tire Sealant Canister
5. On/Off Button
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
9. Power Plug
10. Air Only Hose
If a tire goes flat, avoid further ti ...
Turbocharger Assemble
Caution: Refer to Fastener Caution.
Install the NEW quick fitting connector (2) and a NEW seal ring (1) to the
turbocharger and tighten to 20 Y (15 lb ft).
Inspect the turbocharger coolant pipes for ridges and damage.
Install the tur ...
Fuel Feed Pipe Replacement
Removal Procedure
.-
Remove the fuel feed pressure sensor. Refer to Fuel Pressure Sensor
Replacement - Fuel Feed Pipe.
Disconnect the fuel feed pipe (1). Refer to Plastic Collar Quick Connect
Fitting Service.
Remove the plastic retainer (1) ...