Fluid Passages (Gen 2)Ignition Positions
The ignition switch has four different positions.
To shift out of P (Park), the ignition must be in ON/RUN and the regular brake
pedal applied.
1 (STOPPING THE ENGINE/LOCK/ OFF): When the vehicle is stopped, turn the ignition
switch to LOCK/ OFF to turn the engine off.
This position locks t ...
Driver or Passenger Seat Head Restraint Guide Replacement
Driver or Passenger Seat Head Restraint Guide Replacement
Callout
Component Name
Preliminary Procedure
Remove the seat head restraint. Refer to Driver or Passenger Seat Head
Restraint Replacement.
1
...
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...