|
Callout |
Component Name |
|---|---|
|
1 |
A/Trans Fluid Pump Body Note: Measure the distance from the bottom of a gauge bar to the bottom of the pump rotor cavity. Refer to Fluid Pump Selective Specifications. Special Tools
GE 34673 Flat Gauge Bar or equivalent |
|
2 |
A/Trans Fluid Pump Driven Gear Note: Refer to Fluid Pump Selective Specifications to select the correct gear. |
|
3 |
A/Trans Fluid Pump Drive Gear Note: Refer to Fluid Pump Selective Specifications to select the correct gear. |
Vehicle, Engine and Transmission ID and VIN Location, Derivative and Usage
Torque Converter Housing with Fluid Pump Assembly Installation (6T30)Ambient Air Temperature Sensor Replacement
\/\\//\\\\(in
Ambient Air Temperature Sensor Replacement
Callout
Component Name
Preliminary Procedures
Raise and support the vehicle. Refer to Lifting and Jacking the
Vehicle.
Remove the front bumper fascia opening lower c ...
New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will
perform better in the long run if you follow these guidelines:
Do not drive at any one constant speed, fast or slow, for the first
805 km (500 mi). Do not make full-throttle starts. Avoid downshifting t ...
Gears Cleaning and Inspection (Gen 1)
Gears
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exposed to chemicals.
Clean the following gears in a suitable solvent and
air dry all the p ...