Chevrolet Sonic Repair Manual: Forced Induction
- Turbocharger Assemble
- Turbocharger Cleaning and Inspection
- Turbocharger Coolant Feed Pipe Replacement (LUV)
- Turbocharger Coolant Return Pipe Replacement (LUV)
- Turbocharger Disassemble
- Turbocharger Installation
- Turbocharger Oil Feed Pipe Replacement
- Turbocharger Oil Return Pipe Replacement
- Turbocharger Removal
- Turbocharger Replacement
- Turbocharger System Description
- Turbocharger Wastegate Regulator Solenoid Valve Replacement
- Charge Air Cooler Inlet Air Hose Replacement
- Charge Air Cooler Outlet Air Hose Replacement
- Charge Air Cooler Replacement
Passenger Compartment Air Filter Replacement (LHD)
Passenger Compartment Air Filter Replacement
Callout
Component Name
Preliminary Procedure
Remove IP compartment. Refer to Instr ...
Turbocharger Assemble
Caution: Refer to Fastener Caution.
Install the NEW quick fitting connector (2) and a NEW seal ring (1) to the
turbocharger and tighten to 20 Y (15 lbR ...
Other materials:
Instrument Panel Center Molding Replacement (Without U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Replacing Engine Gaskets
Gasket Reuse and Applying Sealants
Do not reuse any gasket unless specified.
Gaskets that can be reused will be identified in the service procedure.
Do not apply sealant to any gasket or sealing surface unless called
out in the service information.
Separating ...
Crankshaft and Bearing Cleaning and Inspection
Special Tools
EN-45059 Torque Angle Sensor Kit
GE-571-B Dial Gauge
For equivalent regional tools, refer to Special Tools.
Crankshaft End Play, Check
Note: Crankshaft attached with crankshaft bearing caps.
Install the GE-571-B gauge (1).
...
0.005