Chevrolet Sonic Repair Manual: Front

Valve Guide Reaming, and Valve and Seat Grinding

Valve Cleaning Procedure Use soft bristle wire brush to clean any carbon build-up from the valve head. DO NOT use a wire brush on any part of the valve stem. The valve stem is chr ...

Front Seat Back Recliner Handle Replacement

Front Seat Back Recliner Handle Replacement Callout Component Name 1 Front Seat Recliner Handle Cover Cap Procedure ...

Other materials:

Sunroof Motor/Actuator Initialization/Teach Process
Note: If the sunroof motor is new, cycle the sunroof seven?€‰(7) times to teach the motor/actuator initialization process. Perform the initialization/teach procedure on a reinstall motor or a new motor. Ensure the electrical harness on the headliner is connected to the sunroof mot ...

Brake Drum Refinishing
Special Tools CH-41013 Rotor Resurfacing Kit CH-42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Warning: Refer to Brake Dust Warning. The brake drums do not require refinishing as part of routine brake system service. Do not refinis ...

Scrub Radius Description
Ideally, the scrub radius is as small as possible. Normally, the SAI angle and the centerline of the tire and the wheel intersect below the road surface, causing a positive scrub radius. With struts, the SAI angle is much larger than the long arm/short arm type of suspension. This allows the S ...