Callout |
Component Name |
---|---|
1 |
Front Bumper Fascia Opening Lower Cover Push-In Retainer |
2 |
Front Bumper Fascia Opening Lower Cover Bolt (Qty:?€‰2) Caution: Refer to Fastener Caution.
22?€‰Y (16?€‰lb?€‰ft) |
3 |
Front Bumper Fascia Opening Lower Cover Screw (Qty:?€‰3) Tighten
2.5?€‰Y (22?€‰lb?€‰in) |
4 |
Front Bumper Fascia Opening Lower Cover |
Front Side Door Adjustment
Front Side Door Adjustment
Callout
Component Name
Preliminary Procedure
Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
1
Front Side Door
Caution: Refer to ...
Engine Oil and Oil Filter Replacement
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
Caution: To prevent damage to oil filter cap ensure proper
tool is used. Do not use an open end wrench which may cause damage to
filter cap.
Using a 24mm socket or closed end wrench loosen ...
Camshaft Replacement
Special Tools
EN-422 Installer
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Note: Take extreme care to prevent any scratches, nicks or
damage to the camshafts and caps bearing surfaces.
Remove the timing belt rear cover ( ...