|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the front bumper opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement. |
|
|
1 |
Front Bumper Impact Bar Lower Bracket Screw (Qty:?€‰3) Caution: Refer to Fastener Caution.
8?€‰Y (71?€‰lb?€‰in) |
|
2 |
Front Bumper Impact Bar Lower Bracket Procedure
Lift up the front of the lower bracket enough to release the front guide tab from the front fascia. |
Front Bumper Fascia Tow Eye Access Hole Cover Replacement
Front Bumper Impact Bar ReplacementRear Wheel Bearing and Hub Replacement (Disc Brake)
Special Tools
EN–45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Raise and suitably support the vehicle. Refer to Lifting and Jacking
the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal
and Insta ...
Fuel Tank Heat Shield Replacement
Removal Procedure
Support the fuel tank with a suitable jack.
Remove the fuel tank strap fasteners (1) and lower the fuel tank straps (2).
Remove the fuel tank heat shield fasteners (1) and remove the fuel tank
heat shield (2).
...
Inspection/Maintenance (I/M) System DTC Table
Inspection/Maintenance (I/M) System DTC Table
System
DTCs Required to Set System Status to YES
If an inspection/maintenance system status indicator did not update to
yes during the Inspection/Maintenance Complete System
Set Pro ...