|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the front floor console assembly. Refer to Front Floor Console Replacement. |
|
|
1 |
Front Floor Console Cup Holder Fasteners (Qty:?€‰6) Caution: Refer to Fastener Caution. |
|
2 |
Front Floor Console Cup Holder Assembly |
Cup HoldersAutomatic Door Locks
The vehicle is programmed so that when the doors are closed, the ignition is
on, and the shift lever is moved out of P (Park) for automatic transmissions, or
when the vehicle speed is above 13 km/h (8 mph) for manual transmissions, the doors
and the trunk/liftgate will lock.
To unlock the doo ...
Lower Anchor and Top Tether Anchor Locations
(Top Tether Anchor): Seating positions
with top tether anchors.
(Lower Anchor): Seating positions
with two lower anchors.
To assist in locating the lower anchors, each seating position with lower anchors
has two labels, near the crease between the seatback and the seat cushion.
To ass ...
Intake Manifold Disassemble (1.8L LUW and LWE)
Remove the intake manifold absolute pressure sensor bolt (1).
Remove the manifold absolute pressure sensor (2) from the intake manifold (3).
Remove the intake manifold mount (2) from the intake manifold (1).
Remove the throttle body seal& ...