|
Callout |
Component Name |
|---|---|
|
1 |
Front Floor Console Extension Push-In Retainer |
|
2 |
Front Floor Console Extension Procedure
Use a flat bladed plastic trim tool in order to release the retainers securing the extension to the console assembly. |
Front Floor Console Cup Holder Replacement
Front Floor Console Extension Replacement - Right SideDriver or Passenger Seat Cushion Frame Replacement
Driver or Passenger Seat Cushion Frame Replacement
Callout
Component Name
Preliminary Procedures
Remove the driver or passenger seat. Refer to Driver or Passenger
Seat Removal and Installation
Remove the front seat cushio ...
Engine Replacement
Special Tools
EN-48244 Engine Assembly Remove/Install Pallet Supporter
Removal Procedure
Remove the battery and battery tray. Refer to Battery Tray Replacement.
Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
Recover the refrigerant. Refer to Refrigera ...
Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral
(N) position, the transmission will provide engine braking. In this operating range,
the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine
braking mode, the following changes occur with ...