|
Callout |
Component Name |
|---|---|
|
1 |
Front Floor Console Extension Procedure
Use a flat bladed plastic trim tool in order to release the retainers securing the extension to the console assembly. |
Front Floor Console Extension Replacement - Left Side
Front Floor Console Multifunction Switch ReplacementFog Lamp Aiming
Preparation Procedure
Note: Horizontal aim is not adjustable on this vehicle. Vertical
aim is done by an adjusting nut located on the rear of the fog lamp. Prior
to aiming the fog lamps, perform the following steps:
Completely assemble all of the components on the vehi ...
Center Pillar Upper Trim Panel Replacement
Center Pillar Upper Trim Panel Replacement
Callout
Component Name
Preliminary Procedure
Remove the center pillar lower trim panel. Refer to Center Pillar
Lower Trim Panel Replacement.
Remove the seat belt from the front s ...
Front Seat Cushion Inner Trim Panel Replacement
Front Seat Cushion Inner Trim Panel Replacement
Callout
Component Name
1
Driver or Passenger Seat Inner Recliner Finish Cover Cap
Procedure
Use a flat-bladed tool to release the cap from the recliner cover.
...