Chevrolet Sonic Repair Manual: Front Floor Console Replacement

Chevrolet Sonic Repair Manual / Body / Body Interior / Center Console / Front Floor Console Replacement

Front Floor Console Replacement
Callout	Component Name
Preliminary Procedures Remove the right and left front floor console extensions. Refer to Front Floor Console Extension Replacement - Right Side and Front Floor Console Extension Replacement - Left Side. Remove the front floor console cover assembly. Refer to Front Floor Console Cover Replacement.
1	Front Floor Console Fasteners (Qty:?€‰6) Caution: Refer to Fastener Caution. Procedure Move the front seats to the full forward position to access the front floor console rear fasteners.
2	Front Floor Console Procedures Disconnect the electrical connections. When replacing the console, transfer all necessary components.

Front Floor Console Multifunction Switch Replacement

Front Floor Console Multifunction Switch Replacement Callout Component Name Preliminary Procedure Remove the front floor consol ...

Instrument Cluster Upper Bezel Replacement

Instrument Cluster Upper Bezel Replacement Callout Component Name 1 Instrument Panel Cluster Upper Bezel Procedures ...

Other materials:

SIR Seatbelt Pretensioner Handling Warning
Warning: When carrying an undeployed inflatable restraint seat belt retractor pretensioner: Do not carry the seat belt pretensioner by the seat belt webbing or pigtail connector, if equipped. Carry the seat belt pretensioner by the housing, keeping hands and fingers away fro ...

Crankshaft Balancer Removal
Special Tools EN-652 Flywheel Holder For equivalent regional tools, refer to Special Tools. Install the EN-652 holder (1). Lock the flywheel (2) or the automatic transmission flex plate via the starter ring gear. Remove and DISCARD the crankshaft balancer bo ...

Ignition Coil Removal
Special Tools EN-6009 Remover and Installer Ignition Module For equivalent regional tools, refer to Special Tools. Remove the 2 ignition coil bolts (1). Install EN-6009 remover and installer (2) and remove the ignition coil (1). ...

0.0097