|
Callout |
Component Name |
|---|---|
Preliminary Procedure
|
|
|
1 |
Front Fog Lamp Screw (Qty:?€‰3) Caution: Refer to Fastener Caution. Remove the three fog lamp mounting screws from the front bumper fascia. |
|
2 |
Front Fog Lamp Procedure
Aim the front fog lamps after replacement. Refer to Fog Lamp Aiming. |
Front Fog Lamp Cover Replacement (Without T3U)
Headlamp AimingDinghy Towing RS Model with Automatic Transmission
Caution
If the vehicle is towed with all four wheels on the ground, the drivetrain
components could be damaged. The repairs would not be covered by the vehicle warranty.
Do not tow the vehicle with all four wheels on the ground.
The vehicle was not designed to be towed with all four wheels o ...
Instrument Panel Center Molding Replacement (With U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Drivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...