|
Callout |
Component Name |
|---|---|
|
1 |
Front Seat Recliner Handle Cover Cap Procedure
Use a flat-bladed tool to release the handle cover from the handle assembly. |
|
2 |
Front Seat Recliner Handle Procedure
Use a flat-bladed tool to release the handle from the seat. |
Seat Controls
Front Seat Riser Finish Cover ReplacementStabilizer Shaft Replacement
Removal Procedure
Remove the intermediate steering shaft lower bolt. Refer to Intermediate
Steering Shaft Replacement.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal
and Inst ...
Warm Up Three-Way Catalytic Converter Installation
Install the warm up three way catalytic converter (5) to the brackets and
the turbocharger. Use a NEW warm up three way catalytic converter seal (2).
Note: Never re-use the V-clamp.
Install a NEW warm up three way catalytic converter V-clamp (1).
In ...
Thrust Washer and Bearing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exposed to chemicals.
Caution: Do not allow the bearings to spin. Turn them slowly by
hand. Spinning the beari ...