|
Callout |
Component Name |
|---|---|
|
1 |
Driver or Passenger Seat Belt Tensioner Cover Procedure
Remove the tensioner cover by pushing downward on the rear and center of the cover. Then applying light pressure to the front of the cover, push the cover rearward to remove it from the seat frame. |
Front Brake Caliper Replacement
Front Seat Belt Anchor Plate Tensioner ReplacementStarter Installation
Install the starter (4).
Install the lower starter bolt stud (3) and if equipped the washer.
Install the upper starter bolt (2) and if equipped the washer (1).
Caution: Refer to Fastener Caution.
Tighten the starter bolt and starter bolt stud to 25 ...
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection
Removal Procedure
Note: Perform the following procedure when removing the retaining
rings and cooler lines from the quick connect fittings located on the
radiator and/or the transmission.
Pull the plastic cap back from the quick connect fitting
and dow ...
RAB system limitations
WARNING
The following limitations apply to the Rear Automatic Braking (RAB) system
in the Nissan Armada. Failure to fully understand and follow these limitations may
result in serious injury or even fatal accidents.
When the Nissan Armada approaches an obstacle while the accelerator or
b ...