|
Callout |
Component Name |
|---|---|
|
Preliminary Procedures
Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement. |
|
|
1 |
Driver or Passenger Seat Shoulder Belt Fastener Caution: Refer to Fastener Caution.
45?€‰Y?€‰(33?€‰lb?€‰ft) |
|
2 |
Front Seat Shoulder Belt Guide Adjuster Bolt (Qty:?€‰2) Tighten
45?€‰Y?€‰(33?€‰lb?€‰ft) |
|
3 |
Front Seat Shoulder Belt Guide Adjuster |
Front Seat Belt Buckle Replacement
Rear Seat Belt Buckle ReplacementParking Brake Adjustment (Disc Brake)
Note: The park brake cable adjusting nut is a nylon lock type. Use
ONLY HAND TOOLS whenever tightening or loosening the adjusting nut.
Apply and fully release the park brake several times. Verify that the park
brake lever releases completely.
Turn ON the ignition. Verify the red B ...
Automatic Transmission Flex Plate Removal
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
Install the EN-652 holder (1) to hold the automatic transmission
flex plate (2).
Loosen the 6 automatic transmission flex plate bolts.
Remov ...
Throttle Body Assembly Installation
Install a NEW throttle body seal.
Install the throttle body (1).
Caution: Refer to Fastener Caution.
Install the 4 throttle body bolts (2) and tighten to 8 Y (71 lb in).
...