Callout |
Component Name |
---|---|
1 |
Driver or Passenger Seat Inner Recliner Finish Cover Cap Procedure
Use a flat-bladed tool to release the cap from the recliner cover. |
2 |
Driver or Passenger Seat Inner Recliner Finish Cover Fastener (Qty:?€‰2) Caution: Refer to Fastener Caution.
8?€‰Y (71?€‰lb?€‰in) |
3 |
Driver or Passenger Seat Inner Recliner Finish Cover Procedure
Firmly grasp the upper area of the finish cover that folds over the seat cushion frame, pull upward and then outboard to disengage the finish cover from the seat cushion frame. |
Liftgate Emblem/Nameplate Replacement (Hatchback)
Liftgate Emblem/Nameplate Replacement
Callout
Component Name
1
Liftgate Emblem/Nameplate Assembly
Caution: Refer to Exterior Trim Emblem Removal Caution.
Procedure
The part and surface should be 2 ...
Airbag Steering Wheel Module Coil Centering
Note: If a double wire harness strap is installed onto the wire
harness assembly and steering column, the original holder for the wire strap(s)
MUST be reused during installation.
Remove the wire harness strap(s) where necessary.
Caution: The new SIR coil assembly will ...
Fluid Cooler Outlet Hose Replacement
Removal Procedure
Remove the front bumper fascia opening lower cover.
Refer to Front Bumper Fascia Opening Lower Cover
Replacement
Remove the front wheelhouse liner inner front extension.
Refer to Front Wheelhouse Liner Inner Front Extension
Replacement
...