Chevrolet Sonic Repair Manual: Front Seat Cushion Outer Trim Panel Replacement

Chevrolet Sonic Repair Manual / Body / Seating / Seats / Front / Front Seat Cushion Outer Trim Panel Replacement

Front Seat Cushion Outer Trim Panel Replacement
Callout	Component Name
Preliminary Procedures Remove the driver or passenger seat recliner handle. Refer to Front Seat Back Recliner Handle Replacement Remove the front seat adjuster handle. Refer to Driver or Passenger Seat Adjuster Handle Replacement
1	Front Seat Cushion Outer Trim Panel Fasteners (Qty:?€‰3) Caution: Refer to Fastener Caution.
2	Front Seat Cushion Outer Trim Panel Procedure Make sure the seat is in the full up position. Gently pull outboard on the front half of the finish cover to disengage the panel rib from the seat frame. Firmly grasp the upper area of the finish cover that folds over the seat cushion frame, this area needs to be flexed outward while sliding the finish cover upward. If replacing the cover, transfer components as necessary.

Front Seat Cushion Inner Trim Panel Replacement

Front Seat Cushion Inner Trim Panel Replacement Callout Component Name 1 Driver or Passenger Seat Inner Recliner Finish ...

Front Seat Heater Control Module Replacement

Front Seat Heater Control Module Replacement Callout Component Name 1 Front Seat Heater Control Module Fastener (Qty:?� ...

Other materials:

Roof Outer Panel Replacement (5HB)
Removal Procedure Warning: Refer to Approved Equipment for Collision Repair Warning. Disable the SIR system. Refer to SIR Disabling and Enabling. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove all ...

Engine Mount Replacement
Engine Mount Replacement Callout Component Name Preliminary Procedures Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement. Install the engine support fixture. Refer to Engine Support Fixture. ...

Engine Oil Cooler Installation
Note: Lubricate the oil cooler seal (8) with clean engine oil. Install the engine oil cooler assembly (6) along with 2 NEW sealings (8) and (9). Install the 3 oil cooler bolts (5) and tighten to 10 Y (89 l ...

0.0069