Chevrolet Sonic Repair Manual: Front Seat Outboard Seat Back Airbag Replacement

Chevrolet Sonic Repair Manual / Body / Restraints / Restraints Control / Front Seat Outboard Seat Back Airbag Replacement

Front Seat Outboard Seat Back Airbag Replacement
Callout	Component Name
Warning: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary: The seat cushion frame The seat recliner, if equipped The seat adjuster The seat back frame Failure to do so may cause future personal injury. Warning: Do not repair or replace the seat stitching or seams in the seat back trim cover with an internal mounted seat side airbag module. Replace the complete seat back trim cover from the OEM. Non-OEM seat stitching may cause improper airbag deployment which could result in personal injury. Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation. Remove the driver or passenger seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cover and Pad Replacement.
1	Seat Side Inflatable Restraint Module Nut (Qty:?€‰2) Caution: Refer to Fastener Caution Tighten 4?€‰Y (35?€‰lb?€‰in)
2	Driver or Passenger Seat Side Inflatable Restraint Module Procedure Disconnect the electrical connector. Remove the seat side inflatable restraint module. Refer to Inflatable Restraint Module Handling and Scrapping.

Front Seat Belt Anchor Plate Tensioner Replacement

Front Seat Belt Anchor Plate Tensioner Replacement Callout Component Name Warning: Refer to SIR Warning. Warning: ...

Inflatable Restraint Module Handling and Scrapping

Special Tools EL-38826 SIR Deployment Harness EL-39401-B SIR Deployment Fixture For equivalent regional tools, refer to Special Tools. Live and Undeployed Air Bag Warning: Refe ...

Other materials:

Front Lower Grille Replacement
Front Lower Grille Replacement Callout Component Name Preliminary Procedures Remove the front bumper fascia assembly. Refer to Front Bumper Fascia Replacement. Remove the front bumper fascia energy absorber. Refer to Fron ...

Input and Output Speed Sensor Installation
Input and Output Speed Sensor Installation Callout Component Name 1 Input Speed Sensor Assembly Seals 2 Input Speed Sensor Assembly 3 Input Speed Sensor Bolt ...

3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement (Gen 2)
3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement Callout Component Name Special Tools DT-46620 Seal Installer For equivalent regional tools, refer to Special Tools. 1 3? Reverse and ...

0.0071