Callout |
Component Name |
---|---|
1 |
Front Side Door Lock Cylinder Screw Access Plug Tip: Use the appropriate tool, remove the plug. |
2 |
Front Side Door Lock Cylinder Clamp Screw Caution: Refer to Fastener Caution. Procedure
Do Not remove the cylinder clamp screw completely from the housing, unscrew the screw to a hard stop, releasing the cylinder from the housing. Tip: It is not necessary to remove the outside door handle or housing to replace the lock cylinder.
5?€‰Y (44?€‰lb?€‰in) |
3 |
Front Side Door Lock Cylinder Cover Procedure
Remove the lock cylinder cover. Refer to Front Side Door Lock Cylinder Opening Cover Replacement. |
4 |
Front Side Door Lock Cylinder Procedure
|
Sunroof
On vehicles with this feature, the sunroof only operates when the ignition is
turned to ON/RUN or Retained Accessory Power (RAP) is active.
Open/Close: To open the sunroof, press and hold the rear of the switch. To close
the sunroof, press and hold the front of the switch.
Vent: Press and ho ...
Immobilizer Light
The immobilizer light should come on briefly as the engine is started. If it
does not come on, have the vehicle serviced by your dealer. If the system is working
normally, the indicator light turns off.
If the light stays on and the engine does not start, there could be a problem
with the i ...
Camshaft Timing Chain Replacement
Special Tools
EN-955 Locking Pin
For equivalent regional tools. Refer to Special Tools.
Removal Procedure
Remove the engine front cover. Refer to Engine Front Cover with Oil
Pump Replacement.
Note: If EN-955 fixing pin can not be inserted, compress the
ti ...