Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Front Side Door Window Replacement

Chevrolet Sonic Repair Manual / Body / Doors and Enclosures / Doors / Front Side Door Window Replacement



Front Side Door Window Replacement

Callout

Component Name

Warning:

Refer to Glass and Sheet Metal Handling Warning.

Preliminary Procedures

  1. Remove the front side door trim panel. Refer to Front Side Door Trim Replacement.
  2. Remove the front side door rear guide. Refer to Front Side Door Window Rear Guide Replacement
  3. Remove the front side door window outer sealing strip. Refer to Front Side Door Window Outer Sealing Strip Replacement.

1

Front Side Door Window Regulator Guide Nuts?€‰(Qty:?€‰2)

Caution:

Refer to Fastener Caution.

Procedure

  1. Use masking tape, tape off the outer door frame and applique to prevent scratching.
  2. Remove the front side door water deflector.
  3. Loosen nuts so that the window can be removed from the guides.
  4. In order to remove the window out of the frame, carefully grasp and tilt the window as you guide the window up and forward.
Tighten


11?€‰Y?€‰(97?€‰lb?€‰in)

2

Front Side Door Window

Procedure

  1. Lower the window to align the guide nuts with the access holes in the inner door panel.
  2. Do not operate the regulator motor without supporting the window. Ensure that the window remains in the guide when operating the regulator motor.
  3. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guide.
  4. Inspect the window for proper operation before installing the trim panel.
Front Side Door Window Regulator Replacement
Front Side Door Window Regulator Replacement Callout Component Name Warning: Refer to Glass and Sheet Metal Handling Warning. ...

Front Side Door Window Switch Bezel Replacement (Left Side)
Front Side Door Window Switch Bezel Replacement Callout Component Name Preliminary Procedure Remove the front side door trim. R ...

Other materials:

Lower Anchor and Top Tether Anchor Locations
(Top Tether Anchor): Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. To assist in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. To ass ...

Park - Engine Running (Gen 2)
When the gear selector lever is in the Park (P) position, fluid is drawn into the pump through the transmission fluid filter assembly. Line pressure is then directed to the following valves: Fluid Pressure Directed in Preparation for a Shift Manual Valve Mechanically controlled by ...

Camshaft Position Sensor Replacement
Camshaft Position Sensor Replacement Callout Component Name 1 Camshaft Position Sensor Fastener Caution: Refer to Fastener Caution. Tighten 6 Y (54 lb in) 2 ...

© 2014-2025 Copyright www.csmans.com
 
0.0089