Chevrolet Sonic Repair Manual: Front Wheel Drive Shaft Seal Replacement - Left Side

Chevrolet Sonic Repair Manual / Powertrain / Driveline / Driveshafts / Front Wheel Drive Shaft Seal Replacement - Left Side

Front Wheel Drive Shaft Seal Replacement - Left Side
Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the front wheel drive shaft from the transmission. Refer to Front Wheel Drive Shaft Replacement.
1	Left Front Wheel Drive Shaft Oil Seal Procedure Remove the left front wheel drive shaft oil seal using the DT-7004 hammer and the DT-23129 universal seal remover. Coat the NEW left front wheel drive shaft oil seal with transmission fluid. Install the NEW left front wheel drive shaft oil seal using the DT-519 drift and hammer. Note: Do not reuse the wheel drive shaft oil seal. Special Tools DT-519 Installer Drift DT-23129 Universal Seal Remover DT-7004 Slide Hammer For equivalent regional tools, refer to Special Tools.

Front Wheel Drive Shaft Seal Replacement - Left Side

Special Tools DT-446 Installer Drift DT-7004 Slide Hammer DT-23129 Universal Seal Remover For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and ...

Front Wheel Drive Shaft Seal Replacement - Right Side

Front Wheel Drive Shaft Seal Replacement - Right Side Callout Component Name Preliminary Procedures Raise and support the vehicle. ...

Other materials:

Rear Window Panel Trim Replacement
Rear Window Panel Trim Replacement Callout Component Name Preliminary Procedures Remove the body lock pillar upper trim panel. Refer to Body Lock Pillar Upper Trim Panel Replacement. Remove the body rear seat back trim pa ...

Service Prior to Assembly
The importance of cleanliness during assembly cannot be overstated. Dirt or debris will cause engine damage. An automobile engine is a combination of many machined, honed, polished and lapped surfaces with minor tolerances. When any internal engine parts are serviced, care and cleanliness are ...

Turbocharger Replacement
Special Tools EN-49942 Holding Wrench For equivalent regional tools, refer to Special Tools. Removal Procedure Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Drain the cooling system. Refer to Cooling System Draining and Fi ...

0.0071