|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Front Wheelhouse Liner Screw ?€“ Front (Qty:?€‰5) Caution: Refer to Fastener Caution.
2.5?€‰Y?€‰(22?€‰lb?€‰in) |
|
2 |
Front Wheelhouse Liner Push-In Retainer ?€“ Front (Qty:?€‰2) |
|
3 |
Front Wheelhouse Liner ?€“ Front Procedure
Disengage the upper interlocking retainers. |
Front Wheelhouse Liner Inner Front Extension Replacement (Right Side, LUV)
Front Wheelhouse Liner Replacement (Rear)Power Door Locks
Select and the following may display:
Auto Door Unlock
Unlocked Door Anti Lock Out
Delayed Door Lock
Auto Door Unlock
Select to set which of the doors will automatically unlock when the vehicle is
shifted into P (Park).
Select All Doors, Driver Door, or Off.
Unlocked Door Anti Lock O ...
Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See Engine Compartment Overview for the location
of the reservoir.
There are only two reasons why the fluid level in the reservoir might go down:
The fluid level goes down b ...
Engine Flywheel Removal
Special Tools
EN-652 Flywheel Holder
For equivalent regional tools, refer to Special Tools.
Install EN-652 holder (1) to hold the engine flywheel (2).
Remove and DISCARD the 6 engine flywheel bolts (2).
Remove the engine flywheel (1).
...