|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Front Wheelhouse Liner Screw ?€“ Front (Qty:?€‰5) Caution: Refer to Fastener Caution.
2.5?€‰Y?€‰(22?€‰lb?€‰in) |
|
2 |
Front Wheelhouse Liner Push-In Retainer ?€“ Front (Qty:?€‰2) |
|
3 |
Front Wheelhouse Liner ?€“ Front Procedure
Disengage the upper interlocking retainers. |
Front Wheelhouse Liner Inner Front Extension Replacement (Right Side, LUV)
Front Wheelhouse Liner Replacement (Rear)Camber Description
Camber is the tilting of the wheels from the vertical when viewed from the front
of the vehicle. When the wheels tilt outward at the top, the camber is positive (+).
When the wheel tilts inward at the top, the camber is negative (−). The amount of
tilt is measured in degr ...
Tire Rotation
In order to equalize wear, rotate the tires at the specified intervals. Also,
rotate the tire and wheel assembly whenever you notice uneven tire wear.
Radial tires tend to wear faster in the shoulder area, particularly in front
positions, due to design. Radial tires in non-drive locations may ...
HVAC System Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct calibration software, the control module will not control
all of the vehicle features properly.
Ensure th ...