
|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Front Wheelhouse Rear Liner Screw (Qty:?€‰2) Caution: Refer to Fastener Caution.
3?€‰Y (27?€‰lb?€‰in) |
|
2 |
Front Wheelhouse Rear Liner Nut (Qty:?€‰3) Tighten
3?€‰Y (27?€‰lb?€‰in) |
|
3 |
Front Wheelhouse Rear Liner Push-In Retainer (Qty:?€‰2) |
|
4 |
Front Wheelhouse Rear Liner Procedure
Disengage the upper interlocking retainers. |
Front Wheelhouse Liner Replacement (Front)
Fuel Tank Filler Door Latch Housing ReplacementWindshield Washer Solvent Container Filler Tube Replacement
Windshield Washer Solvent Container Filler Tube Replacement
Callout
Component Name
Preliminary Procedure
Open and support the hood assembly.
Grasp the top portion of the windshield washer container filler
tube and rotate t ...
Charging System Description and Operation
Electrical Power Management Overview
The electrical power management system is designed to monitor and control
the charging system and send diagnostic messages to alert the driver of possible
problems with the battery and generator. This electrical power management system
primarily ...
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection
Removal Procedure
Note: Perform the following procedure when removing the retaining
rings and cooler lines from the quick connect fittings located on the
radiator and/or the transmission.
Pull the plastic cap back from the quick connect fitting
and dow ...