Chevrolet Sonic Repair Manual: Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution

Caution:

Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:

• The fuel pipe connections
• The hose connections
• The areas surrounding the connections

Evaporative Emission System Hose/Pipe Replacement

Removal Procedure Disconnect the evaporative emission pipe (1). Refer to Plastic Collar Quick Connect Fitting Service. Remove the plastic retainer  ...

Fuel and Evaporative Emission Pipe Warning

Warning: In order to reduce the risk of fire and personal injury observe the following items: Replace all nylon fuel pipes that are nicked, scratched or damaged during installation, d ...

Other materials:

Floor Carpet Drying
If the carpet or the pad or insulator is wet, use the following criteria for drying or for replacing the components: For a 1-piece carpet assembly bonded to a cotton or a fiber padding, replace the entire assembly. For a 2-piece carpet assembly with a cotton or a fiber padding, replace ...

Heated Seat Control Module Programming and Setup
The seat heating control module must be programmed with the proper calibration software. The module stores and utilizes this information however if it is not properly configured with the correct calibration software, the seat heating control module will not control all of the vehicle features ...

Steering Angle Sensor Replacement
Steering Angle Sensor Replacement Callout Component Name Preliminary Procedure Remove the steering wheel airbag coil. Refer to Steering Wheel Airbag Coil Replacement. 1 Steering Angle Sensor ...